Matters needing attention in transportation of membrane switch

Matters needing attention in transportation of Membrane Switch

Membrane switches have certain precautions during production, transportation and storage. Only in this way can the normal use of membrane switches be guaranteed. Then, what should we pay attention to?
1. Pay special attention to the outlet of the membrane switch when packing and placing it. Make sure that the outlet direction of the membrane switch is above.
2. For membrane switches with visible windows, be careful not to bend the membrane switch due to force when taking and storing, otherwise there will be unrecoverable creases, which will cause damage to the Membrane Switch.
3. A layer of bubble film needs to be laid on the membrane switch in order to perform key reduction work for the pressing of the membrane switch, so that it will not cause damage to the keys and should be stored.
4. There will be a layer of transparent film on the front and back of the Membrane Switch to protect a flash window of the membrane switch. Do not tear off this layer of film when in use.
5. When taking the Electroluminescent Lighting Membrane Switch, be extra careful to avoid scratching. After taking it, the rest should be placed neatly and restored to its original state.
6. When the number of Light Emitting Diodes Membrane Switch is relatively large, when packing the box, pay attention to the switch panel not to lay flat, but to stand upright, so as to effectively prevent the membrane switch buttons from being damaged under heavy pressure for a long time.
The above are the precautions during the sealing and transportation of the membrane switch. What are the precautions for the storage of the membrane switch? When the membrane switch is stored and placed, it must be dust-proof and moisture-proof to ensure that there are no strong acids, strong alkalis or other corrosive gases and substances in the storage environment. At the same time, we must do a good job of preventing pests. These are some precautions for membrane switches, I hope it can be helpful to you.